SD Card Cutout

From nookDevs

Warning: nookDevs.com is not liable if you screw up during this process. kthxbai.

Warning: This will probably (probably = actually) void your warranty, nookDevs.com is not liable for that either in any way shape or form.

Warning: What you are about to do should only be undertaken by a competent person, not your pet monkey Guenter, even if he has a small hat (Futurama).

Warning: Make sure you read the FULL page BEFORE starting anything to confirm you know what you are getting into!

Warning: By following the instructions below you release nookDevs and all related parties from any and all liability and damages as a result of this process. We can help you if you run into problems but we help at OUR discretion.

If you do not want to disassemble your nook every time you need a physical access to the System SD Card (and you do not care about your warranty), you can use the Cutout Template to cut a small window in a plastic part covering the mainboard.

The template was created from the board scan and the end result is displayed below: