FAQ
From nookDevs
>== Frequently Asked Questions ==
How do I root my nook?
That depends. If the first four digits of your nook's serial number are lower than 1003 (or, in some cases, start with 1003), you can try the softroot.
If your first four digits are 1003 or higher, but your system's firmware is not native 1.5, you can try rooting new hardware.
If your hardware is native 1.5, try Rooting 1.5 on any hardware. You could also try this method if you have 1.5 installed on any nook.
How do I set the nookLauncher as the default launcher?
You can now set the nookLauncher to be default from within the nookLauncher, just go into nookLauncher, scroll to the right and tap "use as default launcher" button. Check out video below if you need more details. {{#ev:youtube|x0xi97i-vug}}
How do I install Trook, the browser, etc?
They're already installed, using the Launcher Settings, then hit the '+' to add them to the menu.
How do I disable B&N updates
You need adb to do this, you can do it by issuing the following command (1.3):
adb shell rm /system/app/FirmwareUpdateService.apk
You can also mv it out of the /system/app directory or save it somewhere else using adb pull before removing it. In prior to 1.3 firmware versions you need to (re)move FUS-release.apk package.
I can't uninstall a nookDevs app
if the following fails
adb uninstall com.nookdevs.launcher
You likely did the 1.2 streamlined update when it first came out, we have made some changes in the way things are laid out. You have 2 options.
- Run the latest 1.2 streamlined update, it will run over top of a 1.2 rooted nook, and it will save your settings (You don't need to go to 1.0.0)
- Edit your /data/system/packages.xml and remove the system="true" next to the app you wish to uninstall.
Please note that the #1 method is recommended as there have been other fixes to the update since we released it.
I bricked my Nook, how do I fix it?
I've yet to hear of a single person irrecoverably bricking their nook. Try the following:
- Remove battery.
- Plug the device in via USB
- Boot it up.
How do I revert my nook to its factory freshness?
Please see how on this page on old hardware (pre-1003*) and this page for new hardware (post-1003*); note that this will completely reset your device and remove any side-loaded books or customizations stored on the device.
It's possible the power button reset works on old hardware as well.
How do I switch from Mynook.ru Launcher back to NookLauncher?
You have to uninstall the home.apk, install the original home.apk from stock, and then install nooklauncher.
Can I have your babies?
Maybe, send pics.
What about the Nook Color
See the page at NookColor. In general, Nookdevs.com is currently focusing the brunt of it's efforts on the latest software revision for the original nook. Please do not bother the team as it is too soon to expect much in the way of development!
A community sub-group has formed around the NookColor which is built around the Portal:NookColor page.
As of Monday 29 Nov 2010, the Nook Color rooters have achieved serial console over USB.
As of Dec 1 2010, full root of the NookColor was achieved, See Portal:NookColor for full details and more information and how-to's.
